Catalog No.
KDB93401
Description
PRINCIPLE OF THE ASSAY This assay employs the quantitative competitive enzyme immunoassay technique. An antibody specific for Teriparatide has been pre-coated onto a microplate. Standards or samples are premixed with biotin-labeled Teriparatide and then pipetted into the wells. Teriparatide in the sample competitively binds to the pre-coated antibody with biotin-labeled Teriparatide. After washing away any unbound substances, Streptavidin-HRP is added to the wells. Following a wash to remove any unbound enzyme reagent, a substrate solution is added to the wells and color develops in inversely proportion to the amount of Teriparatide bound in the initial step. The color development is stopped and the intensity of the color is measured.
Applications
Used for the quantitative determination of Teriparatide concentration in serum and plasma.
Detection method
Colorimetric
Sample type
Plasma, Serum
Assay type
Quantitative
Range
1.25 - 80 ng/mL
Sensitivity
1.16 ng/mL
Precision
Intra-Assay Precision (Precision within an assay): <20%
Three samples of known concentration were tested sixteen times on one plate to assess intra-assay precision.
Inter-Assay Precision (Precision between assays): <20%
Three samples of known concentration were tested in twenty four separate assays to assess inter-assay precision.
|
|
Intra-Assay Precision |
Inter-Assay Precision |
||||
|
Sample |
1 |
2 |
3 |
1 |
2 |
3 |
|
n |
16 |
16 |
16 |
24 |
24 |
24 |
|
Mean (ng/mL) |
63.8 |
6.4 |
3.8 |
64.9 |
6.1 |
3.7 |
|
Standard deviation |
7.5 |
0.2 |
0.3 |
7.6 |
0.6 |
0.4 |
|
CV (%) |
11.8 |
3.8 |
8.4 |
11.7 |
10.2 |
11.5 |
Recovery
80-120%
Shipping
2-8 ℃
Stability and Storage
When the kit was stored at the recommended temperature for 6 months, the signal intensity decreased by less than 20%.
For research use only. Not for human or drug use.
