 H3L Antigen ELISA Kit-antibodysystem.jpg)
Catalog No.
KVV12701
Description
PRINCIPLE OF THE ASSAY This assay employs the quantitative sandwich enzyme immunoassay technique. An antibody specific for Monkeypox Virus H3L Antigen has been pre-coated onto a microplate. Standards or samples are pipetted into the wells and any Monkeypox Virus H3L Antigen present is bound by the immobilized antibody. After washing away any unbound substances, a biotin-labeled antibody specific for Monkeypox Virus H3L is added to the wells. After washing away any unbound substances, Streptavidin-HRP is added to the wells. Following a wash to remove any unbound enzyme reagent, a substrate solution is added to the wells and color develops in proportion to the amount of Monkeypox Virus H3L Antigen bound in the initial step. The color development is stopped and the intensity of the color is measured.
Target
H3L
Applications
Used for the quantitative determination of Monkeypox Virus H3L Antigen concentration in serum and plasma.
Detection method
Colorimetric
Sample type
Plasma, Serum
Assay type
Quantitative
Range
0.63 - 40 ng/mL
Sensitivity
0.13 ng/mL
Precision
Intra-Assay Precision (Precision within an assay): <10%
Three samples of known concentration were tested sixteen times on one plate to assess intra-assay precision.
Inter-Assay Precision (Precision between assays): <15%
Three samples of known concentration were tested in twenty four separate assays to assess inter-assay precision.
|
|
Intra-Assay Precision |
Inter-Assay Precision |
||||
|
Sample |
1 |
2 |
3 |
1 |
2 |
3 |
|
n |
16 |
16 |
16 |
24 |
24 |
24 |
|
Mean (ng/mL) |
19.7 |
4.5 |
1.7 |
20.1 |
4.1 |
1.6 |
|
Standard deviation |
0.4 |
0.3 |
0.2 |
0.6 |
0.3 |
0.2 |
|
CV (%) |
1.9 |
6.2 |
9.3 |
2.8 |
6.7 |
11.1 |
Recovery
80-120%
Shipping
2-8 ℃
Stability and Storage
When the kit was stored at the recommended temperature for 6 months, the signal intensity decreased by less than 20%. For unopened kits, if you want to prolong the storage time, please store the Standard, Detection A, Detection B and Microplate at - 20 ℃, the rest reagents should be store at 4℃.
For research use only. Not for human or drug use.
